Showing 1–12 of 14 results

Apexs BCD WTX and WTX-D Series are a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.

Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.

(WTX single tank adapter is not required)

Apexs BCD WTX Harness

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system.
Apeks WTX Harness
Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

This harness is our most versatile yet featuring a range of customization options.

FEATURES & BENEFITS

Can mount directly to a single cylinder using dual nylon cylinder bands or a single tank adapter.
Apexs BCD WTX Back Plate for heavy loads such as twin steel cylinders.
Multiple grommet settings on the waistband allow the attachment of the SureLock™ weight system.
Open shoulder design allows diver to add or remove hardware for total customisation
Made from rugged 1050D Ballistic Nylon.
Removable crotch strap made of 2” (5cm) soft webbing.
6-two inch stainless steel D-rings (2, angled, on shoulders, 2 on the hips and 2 on the crotch strap).
6-one inch stainless steel D-rings along the sides accommodate light canisters, argon bottles or other accessories.
2-one inch stainless steel D-rings along the lower back are for marker buoys, reels or other accessories.
Removable back pad.
Heavy-duty waist buckle made of stainless steel.
Stainless steel tri-loaders distribute the load between the back, waist and shoulders for a great fit.
SOLAS reflector airway hold-downs can be removed or repositioned.
Chest strap comes standard.
Available in 4 sizes: S, M, L & XL.
Includes 2ea. tank bands.

Apexs BCD WTX Single Cylinder Wing

Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.

Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.(WTX single tank adapter is not required)

FEATURES & BENEFITS

Inflator K style with brass buttons
Low profile 16” oval-shaped hose
Safety cable to prevent hyper-extension
Positioned off-centre so as not to interfere with regulator 1st stage
Dump Valve

Low profile flat valve
Positioned in front, lower-left side
Tank Stabilizer Bars

2 large drain grommets
Centre mesh drain panel
Materials:

Exterior: 1000D Armor shield Cordura
Inner air cell: 22mil (.022) thick black urethane
Zipper: heavy duty YKK #10 plastic zip and slide
The 30lb and 40lb wings are able to accept an optional Retractor Kit.

Apexs BCD WSX Side mount Harness · – WTX Donuts Single  –  WTX Donuts Twin · WTX

Apeks, the company that produces the premiere line of technical dive gear, offers you a top of the line side mount harness system. The WSX is a feature rich, complete side mount harness system. The WSX comes complete with either a 25lbs or 45lbs bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.

The Apeks Sidelock sliding D-ring allows the diver to easily change the position of the cylinders as their buoyancy changes during the dive. The 2 piece plate system is adjustable to nearly any torso length, making this truly a one size fits all system.
Apeks WSX Side mount Harness

Brand new from Apeks comes the WSX Side mount harness, a feature-rich Side mount harness system which comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.

Bladder:

WSX-25 (25lbs lift), WSX-45 (45lbs lift)
Armguard exterior
Additional protective layer of Armguard protects the bladder against abrasions in confined spaces.
Reversible inflator can be mounted on left or bright side. (WSX-45 includes an inflator connection on the inside left shoulder)
Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body.

Harness:

Solid 2” (5cm) webbing comes pre-assembled
Removable crotch strap made of 2” (5cm) soft webbing
4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap)
2x “SlideLock” sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive
2x stainless steel drop D-rings along the lower back are for connection to the included butt pack, or for marker buoys, reels or other accessories
Heavy-duty waist buckle made of stainless steel
Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver

• Zippered Butt Pack with stainless steel snap hooks included
• Weight pouches are mounted on the spine strap
• Comes complete with two sizes of bungee and five stainless steel bolt snaps.
• 2 grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements.

Redundant Bladders:

The WSX Sidemount system now has a redundant option with the release of the new Apeks WSX redundant bladders. The bladders are cut to the same dimensions as the WSX-25/45 bladders and are made from the same ultra durable Armoguard material. They are designed to be mounted between the harness and bladder and have reversible inflators allowing the primary and backup inflators to be routed on opposite sides.

Apeks BCD

WTX Pockets

฿1,690฿2,490
This product has multiple variants. The options may be chosen on the product page
฿1,890
This product has multiple variants. The options may be chosen on the product page

Apeks BCD

Airways Complete

฿5,390
Sale!

Apeks BCD

WTX Harness

฿1฿17,790
This product has multiple variants. The options may be chosen on the product page

Apeks BCD

WTX Back Plate

฿6,390฿8,990
This product has multiple variants. The options may be chosen on the product page
฿18,990฿29,290
This product has multiple variants. The options may be chosen on the product page